Fluidic fire Hydrant manifold
W.E. Couplings Ltd have been established since 1991, specialising in the supply of bespoke hose and fittings.
W.E. Couplings manufacture and stock a wide range of industrial rubber and PVC hose in long lengths,
which can be assembled to your individual requirements.
W.E. Couplings Ltd have re-designed traditional fire hydrant manifolds to remove redundant space and material, and smooth the flow of liquid, requiring less power for a greater delivery. With our new fully-fluidic design, there is less variation between the input and output pressures, and also less turbulence is created as the liquid navigates through the manifold.
Designed for large industrial sites, where fire safety is of utmost importance:
Other sizes and configurations are available as bespoke production.
Fire field logistics are of top priority when facing industrial responses. Large scale fire emergencies require huge volumes of water, which sometimes require multiple large diameter water supply hoses. The safest and most reliable means of distributing large volumes of water over an entire facility is by constructing underground water delivery systems (ring mains), with above ground hydrant manifolds.
These hydrant manifolds are then used in conjunction with large diameter water supply hose to supply the necessary water to pumps, sprinkler systems, portable and fixed fire monitors and cannons. This swivel manifold system will allow the first responders to reposition the hydrant in the most advantageous direction depending on the location(s) of the hazard and lock it into place using an onboard swivel lock.
24" S&D Hose triple band swaged
16" Main to 6 x 6" Storz outputs with Check Valves
16" Main to 6 x 6" Storz Outputs with Check Valves and WEFlat hose clamps
16" 360° Swivel in base of manifold with locking pin
Large 8" monitor on a trailer, fed by six layflat inputs
3/4" double jet monitor in action
6" Main to 6x 2.5" Outputs
6" Main to 6x 2.5" Outputs, complete with Pressure Gauge
6" Main to 6x 2.5" BSP Male Outputs, complete with Pressure Gauge
16" Main to 6x 6" Outputs, Coated in RAL3000 Firefighter Red
Large 6" Fixed Cannon
3/4" single jet monitor in action
10" Main to 4x 4" Output Distribution Manifold, Coated in RAL3000 Firefighter Red
Powered by CSS : Designed for W.E. Couplings Ltd by Katie Garbett & James Nevins